Simulations of trajectories
Simulations of geomagnetic field
Simulation batches
Table description

Version - Version of the used internal and external geomagnetic field for particle tracing. Possible values and their meanings are:

  • T96 - Combined IGRF and Tsyganenko 96 magnetic field models.
  • T05 - Combined IGRF and Tsyganenko 05 magnetic field models.
  • T96LCR - Lowest Cutoff Rigidity mode of combined IGRF and Tsyganenko 96 magnetic field models. The simulation stops when the first of the evaluated trajectories is allowed. Since the order of rigidity values simulated is given, the first allowed trajectory will be one with the lowest cut-off rigidity. Simulations in this mode are guaranteed to be faster than in the normal mode, but the result is limited to the lowest cut-off rigidity evaluation.
  • T05LCR - Lowest Cutoff Rigidity mode of combined IGRF and Tsyganenko 05 magnetic field models. The simulation stops when the first of the evaluated trajectories is allowed. Since the order of rigidity values simulated is given, the first allowed trajectory will be one with the lowest cut-off rigidity. Simulations in this mode are guaranteed to be faster than in the normal mode, but the result is limited to the lowest cut-off rigidity evaluation.
  • H0-1968 - Models of geomagnetic field covering period from 0CE - 1900 described in Kudela K., Bobik P., Solar Physics, 2004
  • CALS10k.2 - Model of geomagnetic field covering last 10000 years described in Constable C., Korte M., Panovska S., Earth and Planetary Science Letters, 2016

Latitude start - Latitude component of bottom left corner point of area where magnetic field is evaluated.

Longitude start - Longitude component of bottom left corner point of area where magnetic field is evaluated.

Latitude end - Latitude component of top right corner point of area where magnetic field is evaluated.

Longitude end - Longitude component of top right corner point of area where magnetic field is evaluated.

Latitude step - Latitude step in degrees. It divides the line in this dimension. Points of sivision will be evaluated. If a step in this dimension is zero, the dimension will not be evaulated.

Longitude step - Longitude step in degrees. It divides the line in this dimension. Points of sivision will be evaluated. If a step in this dimension is zero, the dimension will not be evaulated.

Latitude points - Number of points that are evaluated which lie on the line starting at latitude start and ending at latitude end

Longitude points - Number of points that are evaluated which lie on the line starting at longitude start and ending at longitude end

Radius - Radius in units of Earth radii Re, from 1.00 to 10.00 Re, 1.00 Re = 6371.2 km 1.00 Re is Earth surface

Rigidity Step - Step of simulation in GV.

Interval start - Datetime timestamp of the start of evaluated time interval.

Interval end - Datetime timestamp of the end of evaluated time interval.

Time interval - Time interval in hours that splits the interval into time points in which the geographical points will be evaluated.

Date Added - Date when the specific simulation request was added by a user.

Points calculated / entered - Number of space-time points that were evaluated so far. / Number of space-time points that were entered. Each step of simulation evaluates one space-time point.

Number of directions - Specifies how many incoming directions were evaluated for each point specified by temporal and positional coordinates.

View / Delete - Additional information based on state of simulation. Possible states are:

  • X - If you own this request and it is not processed yet, you can remove it.
  • View - If the simulation is finished, anyone can view it.
  • Post processing - Simulation is in process of reprocessing last steps of it because the owner of the simulation changed spectrum at magnetopause.
  • Calculating - The system is still working on this simulation and it is not yet awailable to view.
  • No action - Simulation owner is not the same as the current user or it is in unknown state.

Download - If the simulation is finished, you can download the files straight from this link.

Filter
# Version Latitude Start Longitude Start Latitude End Longitude End Latitude Step Longitude Step Radius Rigidity Step Interval Start Interval End Time Interval Date Added Points calculated / entered Number of directions View / Delete Download
Latitude points Longitude points
51 CALS10k.2 -2.5 30.5 3.5 34.5 2 4 1 0.01 0001-01-01 00:00:00 1901-01-01 23:00:00 8760 2023-04-01 10:40:15 15208/15208 1 View

Be aware that on Windows you need to use software called 7-Zip to open .tar.bz2 archive. Be sure to use the newest version. 7-Zip version 19 contained a bug that would cause a failure when attempting to open tar.bz2 archives. We recommend using version 7-Zip 23.01. Also, be aware that Windows has a limit on the length of paths to 260 characters. In some cases, files in batch simulations can have paths with 150 or more characters. This means that on Windows, you should not put results into paths that are 100 or more characters long already.
4 2
52 CALS10k.2 9 34 15 39 1 2.5 1 0.01 0001-01-01 00:00:00 1901-01-01 23:00:00 8760 2023-04-01 10:38:16 39921/39921 1 View

Be aware that on Windows you need to use software called 7-Zip to open .tar.bz2 archive. Be sure to use the newest version. 7-Zip version 19 contained a bug that would cause a failure when attempting to open tar.bz2 archives. We recommend using version 7-Zip 23.01. Also, be aware that Windows has a limit on the length of paths to 260 characters. In some cases, files in batch simulations can have paths with 150 or more characters. This means that on Windows, you should not put results into paths that are 100 or more characters long already.
7 3
53 CALS10k.2 -2.5 30.5 3.5 34.5 2 4 1 0.01 0001-01-01 00:00:00 1901-01-01 23:00:00 8766 2023-01-03 16:38:19 15192/15192 1 View

Be aware that on Windows you need to use software called 7-Zip to open .tar.bz2 archive. Be sure to use the newest version. 7-Zip version 19 contained a bug that would cause a failure when attempting to open tar.bz2 archives. We recommend using version 7-Zip 23.01. Also, be aware that Windows has a limit on the length of paths to 260 characters. In some cases, files in batch simulations can have paths with 150 or more characters. This means that on Windows, you should not put results into paths that are 100 or more characters long already.
4 2
54 CALS10k.2 9 34 15 39 1 2.5 1 0.01 0001-01-01 00:00:00 1901-01-01 23:00:00 8766 2023-01-03 16:12:01 39879/39879 1 View

Be aware that on Windows you need to use software called 7-Zip to open .tar.bz2 archive. Be sure to use the newest version. 7-Zip version 19 contained a bug that would cause a failure when attempting to open tar.bz2 archives. We recommend using version 7-Zip 23.01. Also, be aware that Windows has a limit on the length of paths to 260 characters. In some cases, files in batch simulations can have paths with 150 or more characters. This means that on Windows, you should not put results into paths that are 100 or more characters long already.
7 3
55 CALS10k.2 -35 285 -35 285 0 0 1 0.01 0001-01-01 00:00:00 1901-01-01 23:00:00 876576 2023-01-01 21:23:29 20/20 577 View

Be aware that on Windows you need to use software called 7-Zip to open .tar.bz2 archive. Be sure to use the newest version. 7-Zip version 19 contained a bug that would cause a failure when attempting to open tar.bz2 archives. We recommend using version 7-Zip 23.01. Also, be aware that Windows has a limit on the length of paths to 260 characters. In some cases, files in batch simulations can have paths with 150 or more characters. This means that on Windows, you should not put results into paths that are 100 or more characters long already.
1 1
56 CALS10k.2 30 30 30 30 0 0 1 0.01 0001-01-01 00:00:00 1901-01-01 23:00:00 876576 2023-01-01 21:21:21 20/20 577 View

Be aware that on Windows you need to use software called 7-Zip to open .tar.bz2 archive. Be sure to use the newest version. 7-Zip version 19 contained a bug that would cause a failure when attempting to open tar.bz2 archives. We recommend using version 7-Zip 23.01. Also, be aware that Windows has a limit on the length of paths to 260 characters. In some cases, files in batch simulations can have paths with 150 or more characters. This means that on Windows, you should not put results into paths that are 100 or more characters long already.
1 1
57 CALS10k.2 30 270 30 270 0 0 1 0.01 0001-01-01 00:00:00 1901-01-01 23:00:00 876576 2023-01-01 16:59:48 20/20 577 View

Be aware that on Windows you need to use software called 7-Zip to open .tar.bz2 archive. Be sure to use the newest version. 7-Zip version 19 contained a bug that would cause a failure when attempting to open tar.bz2 archives. We recommend using version 7-Zip 23.01. Also, be aware that Windows has a limit on the length of paths to 260 characters. In some cases, files in batch simulations can have paths with 150 or more characters. This means that on Windows, you should not put results into paths that are 100 or more characters long already.
1 1
58 CALS10k.2 40 355 40 355 0 0 1 0.01 0001-01-01 00:00:00 1901-01-01 23:00:00 876576 2023-01-01 16:56:20 20/20 577 View

Be aware that on Windows you need to use software called 7-Zip to open .tar.bz2 archive. Be sure to use the newest version. 7-Zip version 19 contained a bug that would cause a failure when attempting to open tar.bz2 archives. We recommend using version 7-Zip 23.01. Also, be aware that Windows has a limit on the length of paths to 260 characters. In some cases, files in batch simulations can have paths with 150 or more characters. This means that on Windows, you should not put results into paths that are 100 or more characters long already.
1 1
59 CALS10k.2 -90 0 90 360 5 5 1 0.01 0001-01-01 00:00:00 1901-01-01 23:00:00 876576 2022-12-10 12:25:00 53280/53280 1 View

Be aware that on Windows you need to use software called 7-Zip to open .tar.bz2 archive. Be sure to use the newest version. 7-Zip version 19 contained a bug that would cause a failure when attempting to open tar.bz2 archives. We recommend using version 7-Zip 23.01. Also, be aware that Windows has a limit on the length of paths to 260 characters. In some cases, files in batch simulations can have paths with 150 or more characters. This means that on Windows, you should not put results into paths that are 100 or more characters long already.
37 72